![background image](http://html.mh-extra.com/html/icom/ic-e2820/ic-e2820_instruction-manual_612425066.webp)
45
5
DV MODE OPERATION (Optional UT-123 is required)
D
D
Repeater operation into another zone
q
Set the desired repeater’s frequency, offset and shift direc-
tion in the main band.
(pgs. 30, 31)
• Select DV mode in advance. (p. 21)
w
Set your own call sign.
(p. 38)
• See p. 36 for your own call sign programming.
e
Set the desired station call sign.
(p. 39)
• When making a CQ call
Set the desired repeater’s
(in a different zone)
call sign into
“YOUR.” The symbol “/” which stands for “CQCQCQ” is
added at the 1st digit automatically.
• See p. 37 for station call sign programming.
r
Set the repeater’s call sign as follows;
z
Push
[
F
•
]
twice to display the function guide 2.
x
Push
[CS](V/MHz•SCAN)
(Left band’s)
to display the
“CALL SIGN” screen.
c
Rotate
[DIAL]
to select “RPT1,” then push
[MAIN•BAND
].
• RPT1 CALL SIGN screen is displayed.
v
Rotate
[DIAL]
to select the nearest repeater’s call sign
then push
[BACK](V/MHz)
(Right band’s)
.
• If the nearest repeater is a gateway repeater, program the re-
peater’s call sign with “G” in the 8th digit.
b
Rotate
[DIAL]
to select “RPT2” then push
[MAIN•BAND
].
• RPT2 CALL SIGN screen is displayed.
n
Rotate
[DIAL]
to select the gateway repeater’s
(in the
same zone)
call sign.
• The call sign should have “G” in the 8th digit.
• When gateway repeater call sign is set in “RPT1,” select “NOT
USE
✱
” for “RPT2” setting.
m
Push
[BACK](V/MHz•SCAN)
(Right band’s)
to exit “CALL
SIGN” screen.
t
Push
[PTT]
to transmit; release to receive.
Summary of Contents for IC-E2820
