![background image](http://html.mh-extra.com/html/icom/ic-e2820/ic-e2820_instruction-manual_612425057.webp)
36
5
DV MODE OPERATION (Optional UT-123 is required)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D
D
Your own call sign programming
Your own call sign must be programmed for both digital voice
and low-speed data communications
(including GPS transmis-
sion)
.
q
Push
[
F
•
]
to display the function guide.
w
Push
[MENU](V/MHz•SCAN)
(Right band’s)
to enter MENU
screen.
e
Rotate
[DIAL]
to select “CALL SIGN MEMORY” then push
[MAIN•BAND]
.
r
Rotate
[DIAL]
to select “MY CALL SIGN MEMORY” then
push
[MAIN•BAND]
.
t
Rotate
[DIAL]
to select the desired call sign channel
(M01
to M06)
, then push
[MAIN•BAND]
.
y
Rotate
[DIAL]
to select the desired character, then push
[>](M/CALL•MW)
(Left band’s)
to move the cursor right.
• Push
[<](V/MHz•SCAN)
(Left band’s) to move the cursor left.
• Up to 8-character call signs can be entered.
• Push
[ABC](TONE•DTMF)
to select the character group from
capital letter characters.
• Push
[12/](M/CALL•MW)
(Right band’s) to select the character
group from numbers or symbols.
• Push
[CLR](DUP•MONI)
to clear the selected character.
u
Repeat step
y
until your own call sign is programmed.
i
Push
[>](M/CALL•MW)
(Left band’s)
several times to move
the cursor to “/” position.
• A to Z, 0 to 9 and “/” characters are available.
• If no note is required, skip steps
i
and
o
, go to step
!0
.
o
Repeat step
y
to program the desired 4-character note.
!0
Push
[MAIN•BAND]
to store the programmed call sign
(or
with note)
.
!1
Push
[BACK](V/MHz•SCAN)
(Right band’s)
three times to
return to frequency indication.
Summary of Contents for IC-E2820
