![background image](http://html.mh-extra.com/html/icom/ic-e2820/ic-e2820_instruction-manual_612425146.webp)
125
15
GPS/GPS-A OPERATION
t
Rotate
[DIAL]
to select the desired character.
• Push
[Aa](TONE•DTMF)
to select the character group from cap-
ital letters or lower case letters.
• Push
[1/](M/CALL•MW)
(Right band’s)
to select the character
group from numbers or symbols.
• Push
[>](M/CALL•MW)
(Left band’s)
to move the cursor right;
push
[<](V/MHz•SCAN)
(Left band’s) to move the cursor left.
• Push
[CLR](DUP/MONI)
to clear the selected character.
• Push and hold
[CLR](DUP/MONI)
for 1 sec. to clear all charac-
ters after the selected character.
y
Push
[MAIN•BAND]
to set the message.
• The cursor disappears.
u
Push
[
F
•
]
once to return to frequency indication.
D
D
Receiving a GPS transmission
q
While in DV mode operation, push
[
F
•
]
three times to
display function guide 3.
w
Push
[POSI](M/CALL•MW)
(Left band’s)
twice to display
the “RX POSITION” screen.
e
Push and hold
[R-WR](LOW•PRIO)
for 1 sec. to store the
received position information.
r
Push
[
F
•
]
once to return to frequency indication.
✔
For your information!
The position display of a received signal is available only if
the transmitting station is using at least one of the following
sentence formatters; RMC, GGA, or GLL.
Frequency
Distance between received station and your positions
Direction of received station
Received call sign indication
Summary of Contents for IC-E2820
