Icom IC-E2820, Instruction Manual

Page: 98 / 164

77
8
SCAN OPERATION
■
Scan resume condition
The scan resume condition can be selected as timer or pause
scan. The selected resume condition is also used for priority
watch.
(p. 80)
q
Push [MAIN•BAND] to select the desired band
(left or right)
as the main band.
w
Push [
F
• ] to display the function guide.
e
Push
[MENU](V/MHz•SCAN] (Right band’s)
to enter MENU
screen.
r
Rotate the
[DIAL]
to select
“
SCAN,
”
then push
[MAIN•BAND] .
t
Rotate the main band’s
[DIAL]
to select
“
SCAN TIMER,
”
then push [MAIN•BAND] .
y
Rotate
[DIAL]
to select the desired timer:
• “T-5” : Scan pauses 5 sec. while receiving a signal.
• “T-10” : Scan pauses 10 sec. while receiving a signal.
• “T-15” : Scan pauses 15 sec. while receiving a signal.
• “P-2”
: Scan pauses until the signal disappears and then re-
sumes 2 sec. later.
u
Push [MAIN•BAND] to set.
i
Push
[BACK](V/MHz•SCAN) (Right band’s)
twice to return
to frequency indication.
z
Push [BAND] to select the desired band
(left or
right)
as the main band.
x
Push [
SET
B(D-OFF)] to enter MENU screen.
c
Push [ Y ] or [ Z ] to select “SCAN” then push
[
SET
B(D-OFF)] to enter scan set mode.
v
Push [ Y ] or [ Z ] to select “SCAN TIMER” then
push [
SET
B(D-OFF)].
b
Push [ Y ] or [ Z ] to select the scan resume condi-
tion, then push [
SET
B(D-OFF)].
• See item
y
at left for scan resume condition details.
n
Push [
CLR
A(MW)] to exit set mode.
SET
B
The display shows that the scan will resume
15 sec. after it stops.