Icom IC-E2820, Instruction Manual

Page: 85 / 164

64
6
MEMORY MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■
Memory bank setting
q
Push the desired band’s
[M/CALL•MW]
several times to
select memory mode, then rotate the same band’s
[DIAL]
to select the desired memory channel.
w
Push and hold the same band’s
[M/CALL•MW]
for 1 sec.
• “ X ” and memory number indication blinks.
e
Push
[SEL](V/MHz•SCAN)
(Left band’s)
once to select
“BANK” setting stand-by condition.
• “ X ” indicator blinks.
r
Push
[EDIT](M/CALL•MW)
(Right band’s)
to edit.
• “
X
” and 1st digit blink.
t
Rotate the same band’s [DIAL] to select the desired bank
group.
• A to Z bank groups available.
y
Push [>](M/CALL•MW)
(Left band’s)
then rotate [DIAL] to
select the desired bank channel.
• “ X ” and last 2 digits blink.
u
Push
[BACK](V/MHz•SCAN)
(Right band’s)
to set the bank
initial and channel number.
• “ X ” indicator blinks.
i
Push and hold
[S.MW](M/CALL•MW)
(Left band’s)
for 1 sec.
to overwrite the memory channel to store the memory bank
settings.
o
Repeat steps
q
to
i
to set another memory channel into
the same or another bank.