![background image](http://html.mh-extra.com/html/icom/ic-e2820/ic-e2820_instruction-manual_612425081.webp)
60
6
MEMORY MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■
General description
The transceiver has 522 memory channels, including 20 scan
edge memory channels (10-pairs) and 2 call channels. Each
of these channels can be individually programmed with oper-
ating frequency
(pgs. 15–17)
, duplex direction
(p. 30)
and offset
(p. 34)
, subaudible tone encoder or tone squelch and its tone
frequency
(pgs. 32, 85–87)
and skip information
(p. 78)
.
In addition, a total of 26 memory banks, A to Z, are available
for usage by group, etc.
■
Memory channel selection
D
Using the tuning dial
q
Push the desired band’s
[M/CALL•MW]
several
times to select memory
mode.
• “
X
” indicator appears.
w
Rotate the same band’s
[DIAL]
to select the de-
sired memory channel.
• Programmed memory
channels only can be se-
lected.
D
Using the [
Y
]/[
Z
] keys
z
Push [BAND] to select the desired band as
the main band.
x
Push [MR/CALL] to select memory mode.
c
Push [
Y
] or [
Z
] to select and set the desired
memory channel.
• Pushing and holding [
Y
]/[
Z
] for 1 sec. activates
a scan.
• If scan is activated, push [
Y
]/[
Z
] again or push
[
CLR
A(MW)] to stop it.
D
Using the keypad
z
Push [BAND] to select the desired band as
the main band.
x
Push [MR/CALL] to select memory mode.
c
Push [
ENT
C(T-OFF)] to activate the keypad
for numeral input.
v
Push 3 appropriate digit keys to input a chan-
nel number.
• Blank channel can be selected.
• Push only 1 appropriate digit key, [
VOL
Y
0(TONE-
2)] to [
SIMP
9(16-KEY-L)] then push [
M
M
(TONE-1)]
or [
SQL
Z
#(16KEY-L)] to select scan edge chan-
nels. “
M
M
” and “#” can be used for “A” and “B” re-
spectively.
MR/CALL
ENT
C
MR/CALL
Y
/
Z
[M/CALL•MW]
[DIAL]
å
X
ß
appears
Summary of Contents for IC-E2820
