![background image](http://html.mh-extra.com/html/icom/ic-e2820/ic-e2820_instruction-manual_612425036.webp)
15
SETTING A FREQUENCY
2
■
Preparation
D
Turning power ON/OFF
➥
Push and hold
[PWR]
for 1 sec. to turn power ON and
OFF.
D
MAIN band
The IC-E2820 can receive 144 MHz and 430 MHz band sig-
nals simultaneously. To change or activate any of the func-
tions or to change frequency via the microphone, you must
designate one band as the main band. The transceiver trans-
mits a signal on the main band only.
➥
Push the desired band’s
[MAIN•BAND]
to select the main
band.
• “
Q
” indicates the main band.
➥
Push [BAND] to toggle the main band between
left and right bands.
D
Operating frequency band selection
In the default condition, or after resetting the CPU, 2 m band
is assigned to the left band, 70 cm band is assigned to the
right band. However, the 2 m band can also be assigned into
the right, and 70 cm band can also be assigned into the left
band.
q
Push and hold the desired band’s
[MAIN•BAND]
for 1 sec.
• Frequency band initial appears.
w
Rotate the same band’s
[DIAL]
to select the desired fre-
quency band.
• Pushing [
Y
]/[
Z
] on the microphone also selects the band.
e
Push the
[MAIN•BAND]
to return to frequency indication in
the selected frequency band.
[DIAL]
[MAIN•BAND]
Frequency band initial is displayed.
BAND
[MAIN•BAND]
[PWR]
Note that in this manual, sections beginning with a micro-
phone icon (as at left), designate operation via the HM-133
microphone.
Summary of Contents for IC-E2820
