![background image](http://html.mh-extra.com/html/icom/ic-e2820/ic-e2820_instruction-manual_612425148.webp)
127
15
GPS/GPS-A OPERATION
D
D
GPS alarm setting
GPS alarm sounds when your own position is close the spec-
ified area. This function can be set the received channel,
speci
fi
ed GPS memory channel, all GPS memory channels
or a memory bank.
q
Push
[GMR](TONE•DTMF)
to select GPS memory mode.
w
Rotate
[DIAL]
to select the desired memory group, or
memory channel.
• “RX,” “ALL,” one of memory bank or memory channel can be se-
lected.
e
Push
[ALM](TONE•DTMF)
to turn the alarm function ON.
• Push
[ALM](TONE•DTMF)
again or push
[Aoff](LOW•PRIO)
to
turn OFF the alarm function.
r
Push
[BACK](V/MHz•SCAN)
(Right band’s)
once or twice to
return to frequency indication.
✔
For your information!
• When “ALL” or memory bank is selected above step
w
, the
alarm functions depending on “ALM AREA1” setting in the
GPS set mode (p. 110).
• When “RX” or memory channel is selected above step
w
,
the alarm functions depending on “ALM AREA2” setting in
the GPS set mode (p. 110).
D
D
GPS memory clearing
q
Push
[GMR](TONE•DTMF)
to select GPS memory mode.
w
Rotate
[DIAL]
to select “ALL,” or desired memory bank,
then push
[MAIN•BAND]
.
e
Rotate
[DIAL]
to select the desired GPS memory channel
• “ALL” or one of memory bank can also be selected.
NOTE:
When selecting “ALL” or one of the memory banks,
all memory channels or all memory channels in the speci
fi
ed
memory bank are cleared, respectively.
r
Push and hold
[CLR](DUP•MONI)
for 1 sec. to clear.
• 3 beeps sound, then the memory channel is cleared.
• Remaining channels scroll up.
t
Push
[BACK](V/MHz•SCAN)
(Right band’s)
twice to return
to frequency indication.
NOTE:
Be careful!— the contents of cleared memories
CANNOT be recalled.
Summary of Contents for IC-E2820
