![background image](http://html.mh-extra.com/html/icom/ic-e2820/ic-e2820_instruction-manual_612425017.webp)
X
QUICK REFERENCE GUIDE
■
Your first contact
Now that you have your IC-E2820 installed in your car or
shack, you are probably anxious to get on the air. We would
like to take you through a few basic operation steps to make
your
fi
rst time “On The Air” an enjoyable experience.
1. Turning ON the transceiver
Before powering up your IC-E2820, you may want to make
sure the audio volume and squelch level controls are set in
9–10 o’clock positions.
Although you have purchased a brand new transceiver, some
settings may be changed from the factory defaults because
of the Quality Control (QC) process. Resetting the CPU is
necessary to start from factory default.
➥
While pushing both band’s
[M/CALL•MW]
keys, push and
hold
[PWR]
for 1 sec. to reset the CPU.
2. Selecting the main band
The IC-E2820 displays 2 frequencies on the left and right
bands simultaneously. However, transmission, some keys
and microphone operation apply only to the main band.
➥
Push the desired band’s (left or right)
[MAIN•BAND]
to se-
lect the main band.
• “
Q
” appears for the main band.
Using the HM-133
You can select the main band from the HM-133.
Push
Push
again
[MAIN•BAND]
[M/CALL•MW]
While pushing both [M/CALL•MW], turn power ON.
[M/CALL•MW]
[PWR]
Set both [VOL] and [SQL] controls to 9–10 o’clock positions.
Quick reference guide
Summary of Contents for IC-E2820
