Icom IC-E2820, Instruction Manual

Page: 132 / 164

111
13
MENU SCREEN OPERATION
■
GPS-A SET MODE items
D D
Unproto address
Sets up to 56-character unproto address.
q
Push
[MAIN•BAND]
to enter programming condition.
w
Rotate
[DIAL]
to select the desired character.
• Push [Aa](TONE•DTMF) to select the character group from cap-
ital letters or lower case letters.
• Push [1/](M/CALL•MW) (Right band’s) to select the character
group from numbers or symbols.
• Push [>](M/CALL•MW) (Left band’s) or [<](V/MHz•SCAN) (Left
band’s) to move the cursor right or left, respectively.
• Push [CLR](DUP/MONI) to clear the selected character.
• Push and hold [CLR](DUP/MONI) for 1 sec. to clear all charac-
ters after the selected character.
e
Repeat steps
w
until the desired address is programmed.
r
Push
[MAIN•BAND]
to set the programmed address.
t
Push
[BACK](V/MHz•SCAN) (Right band’s)
to return to the
GPS-A set mode screen.
D D
Data extension
Sets the data extension capability from “COURSE/SPEED”
and OFF
(default)
.
The transceiver’s course and speed information is addition-
ally transmitted with position data when “COURSE/SPEED”
is selected.
NOTE:
When “COURSE/SPEED” is selected, number of
character for “COMMENT” is limited to 36-character.
D D
Time stamp
Selects transmitting time stamp type from DHM, HMS and
OFF. This function can be transmitted UTC
(Universal Time Co-
ordinated)
time only.
• OFF : No time stamp is transmitted.
(default)
• DHM : Time stamp in the format of Day, Hour and
Minute is transmitted.
• HMS : Time stamp in the format of Hour, Minute and
Second is transmitted.