![background image](http://html.mh-extra.com/html/icom/ic-e2820/ic-e2820_instruction-manual_612425074.webp)
53
5
DV MODE OPERATION (Optional UT-123 is required)
D
D
Message Transmission
Select the message transmission function ON
(Ch01–05)
and
OFF. When a message channel is selected, the transceiver
transmits a text message
(pre-programmed)
.
(default: OFF)
q
Push
[
F
•
]
twice to display the function guide 2.
w
Push
[MSG](LOW•PRIO)
to display the “MESSAGE”
screen.
e
Rotate
[DIAL]
to select “TX MESSAGE,” then push
[MAIN•BAND
].
r
Rotate
[DIAL]
to select the desired message channel.
• “Ch01” to “Ch05” available.
• See page 52 for message programming.
t
Push
[BACK](V/MHz•SCAN)
(Right band’s)
to set the mes-
sage for transmission.
y
Push
[BACK](V/MHz•SCAN)
(Right band’s)
again to return
to function guide 2 indication.
u
Push
[PTT]
to transmit the selected message.
• The message is transmitted each time [PTT] is pushed.
• The message is transmitted each 30 sec. automatically during
continuous transmission.
i
Release
[PTT]
to return to receive.
o
When the reply call with a message is received, the call
sign and the message displays alternately at the bottom of
the function display.
✔
For your information
The automatic received call sign and/or message indication
can be turned OFF in display set mode, if desired.
➥
RX CALL SIGN
(p. 106)
➥
RX MESSAGE
(p. 106)
NOTE:
Only 1 message can be stored in the IC-E2820.
The received message is cleared by turning power OFF,
or overwritten when another message is received.
A transmitted message that includes lower case charac-
ters from the IC-E2820 may not be decoded and displayed
correctly by the IC-V82/U82, etc.
Summary of Contents for IC-E2820
