![background image](http://html.mh-extra.com/html/icom/ic-e2820/ic-e2820_instruction-manual_612425020.webp)
XIII
QUICK REFERENCE GUIDE
■
Programming memory channels
The IC-E2820 has a total of 522 memory channels
(including
20 scan edges and 2 call channels)
for storing often used operat-
ing frequency, repeater settings, etc.
Any memory channel can be recalled on either the left or right
band.
1. Setting a frequency
In VFO mode, set the desired operating frequency with re-
peater, tone and tuning steps, etc.
➥
Push the desired band’s
[V/MHz•SCAN]
to select VFO.
➥
Rotate the same band’s
[DIAL]
to set the desired fre-
quency.
• Set other data, such as repeater tone, duplex information, tuning
step), if desired.
2. Selecting a memory channel
Push and hold the same band’s
[M/CALL•MW]
for 1 sec.,
then rotate the same band’s
[DIAL]
to select the desired
memory channel.
• “
X
” indicator and memory channel number blink.
3. Writing a memory channel
Push and hold
[S.MW](M/CALL•MW)
(Left band’s)
for 1 sec.
to program.
• 3 beeps sound
• Return to VFO mode automatically after programming.
• Memory channel number automatically increases when continuing
to push
[M/CALL•MW]
after programming.
Push [M/CALL•MW] for 1 sec.
Summary of Contents for IC-E2820
