![background image](http://html.mh-extra.com/html/icom/ic-e2820/ic-e2820_instruction-manual_612425082.webp)
VFO settings, including MENU group contents such as sub-
audible tone frequency and offset can be programmed into a
memory channel.
q
Set the desired frequency in the desired band
(left or right)
.
➥
Push the desired band’s
[V/MHz•SCAN]
to select VFO
mode.
➥
Set the frequency using the same band’s
[DIAL]
.
➥
Set other data
(e.g. tone frequency, duplex information, etc.)
if required.
w
Push and hold the same band’s
[M/CALL•MW]
for 1 sec.
• 2 beeps sound
• “
X
” indicator and the memory channel number blink.
e
Rotate the
[DIAL]
to select the memory channel to be pro-
grammed.
• Memory channels not yet programmed are blank.
r
Push and hold
[S.MW](M/CALL•MW)
(Left band’s)
for 1 sec.
to program.
• 3 beeps sound
• Memory channel number automatically increases when contin-
uing to push
[M/CALL•MW]
after programming.
✔
FOR YOUR ONVENIENCE
Memory programming can be performed in various ways e.g.
memory channel to the same (or different) memory channel,
memory channel to the call channel, etc.
■
Programming a memory channel
[EXAMPLE]:
Programming 145.870 MHz into memory channel 20 (blank channel) via the controller.
M
A
IN B A
N
D
Push
Rotate for setting frequency, etc.
Push and hold for 1 sec.
Rotate
Push and hold for 1 sec. and continue to push
➠
Beep
“
V/MHz
SCAN
M/CALL
MW
M/CALL
MW
S.MW
Beep
Beep
Beep
“
“
“
“
“
Beep
Beep
“
“
“
“
“
M
A
IN B A
N
D
61
6
MEMORY MODE OPERATION
Summary of Contents for IC-E2820
