Icom IC-E2820, Instruction Manual

Page: 68 / 164

47
5
DV MODE OPERATION (Optional UT-123 is required)
■
Received call sign
When a call is received in DV mode, the calling station and
the repeater call signs being used can be stored into the re-
ceived call record. The stored call signs are viewable in the
following manner.
Up to 20 calls can be recorded.
D D
Desired call record indication
q
Display the RX call sign record screen;
Accessing from MENU screen:
z
Push
[
F
• ]
to display the function guide.
x
Push
[MENU](V/MHz•SCAN)
(Right band’s)
to display the
“MENU” screen.
c
Rotate
[DIAL]
to select “RX CALL SIGN,” then push
[MAIN•BAND
].
Accessing from function guide 2:
z
Push
[
F
• ]
twice to display the function guide 2.
x
Push
[CD](M/CALL•MW)
(Left band’s)
to display the “RX
CALL SIGN” screen.
w
Rotate
[DIAL]
to select the desired record.
e
Push
[MAIN•BAND]
to display the received call details.
• CALLER : The station call sign that made a call.
• CALLED : The station call sign called by the caller.
• RXRPT1 : The repeater call sign used by the caller station.
• RXRPT2 : The repeater call sign linked from RXRPT1.
*The above screen is displayed when accessing the RX CALL
SIGN screen from function guide 2. A different screen is displayed
when accessing the screen from MENU screen.
r
Push
[MAIN•BAND]
or
[BACK](V/MHz•SCAN)
(Right
band’s)
to return to the “RX CALL SIGN” screen.
t
Push
[BACK](V/MHz•SCAN)
(Right band’s)
to exit from the
“RX CALL SIGN” screen.
✔
For your information
When receiving a call, the received station call sign is auto-
matically displayed at the bottom line of the function display.
This can be turned ON in display set mode.
(p.106)