![background image](http://html.mh-extra.com/html/icom/ic-7850/ic-7850_instruction-manual_612352090.webp)
5-13
5
RECEIVE AND TRANSMIT
D
Keyer set mode
This Set mode is used to set the memory keyer repeat
time, dash weight, paddle specifications, keyer type,
and so on.
• Setting contents
The Multi-function screens are OFF:
Push [KEYER](F).
q
• The Memory keyer screen is displayed.
Display the Memory keyer menu screen, then push
w
[CW KEY](F).
[EXIT/SET]
CW KEY
[F-4]
• The
Keyer CW-Key screen
is displayed.
Push [
e
p
](F) or [
q
](F) to select the item.
Rotate [MAIN DIAL] to set the desired setting.
r
• Hold down [DEF](F) for 1 second to select the default
setting.
Push [EXIT/SET].
t
• Exits the
Keyer CW-Key screen
.
•
Keyer CW-Key screen
Keyer
Repeat Time
(Default: 2s)
When sending CW using the repeat timer, set the time
between transmission.
• Selectable time: 1 ~ 60 seconds in 1 second steps.
Dot/Dash Ratio
(Default: 1:1:3.0)
Sets the dot/dash ratio.
• Selectable ratio: 1:1:2.8 ~ 1:1:4.5 in 0.1 steps.
Keying weight example:
Morse code “K”
DASH
Weight setting:
1:1:3 (default)
Weight setting:
Adjusted
DASH
DOT (fixed*)
Adjustable range
SPACE (fixed*)
*SPACE and DOT length can be
adjusted only with [KEY SPEED].
Rise Time
(Default: 4ms)
Sets the rise time of the transmitted CW envelope.
• Selectable time: 2, 4, 6 or 8 milliseconds.
Key action
Tx output power
• About rise time
Rise time
Tx
Rx
Set Tx power level
Time
0
Paddle Polarity
(Default: NORMAL)
Sets the paddle polarity.
• Normal:
Right – Dash, Left – Dot.
• Reverse: Right – Dot , Left – Dash.
Keyer Type
(Default: ELEC-KEY)
Selects the keyer type for the [ELEC-KEY] connector
on the front panel.
• Selectable key: Straight, BUG-KEY, or ELEC-KEY.
MIC Up/Down Keyer
(Default: OFF)
Sets the microphone [UP]/[DN] switches to be used
as a key. (The microphone [UP]/[DN] switches do not
work as a “squeeze key.”)
• ON: The [UP]/[DN] switches can be used as a key
for CW.
• OFF: The [UP]/[DN] switches cannot be used as a
key for CW.
NOTE:
When “ON” is selected, the frequency and
the Memory channels cannot be changed using the
[UP]/[DN] switches.
[EXIT/SET]
(F) Function keys