manualshive.com logo in svg

Icom iC-7850, Instruction Manual

Share
Download
Icom iC-7850 Instruction Manual Download Page 175

10-6

10

USING AN SD CARD OR USB FLASH DRIVE

Loading the saved data files onto an 

 

■

SD card or USB flash drive

Memory  channels  and  transceiver’s  settings  on  the 
card or flash drive can be copied to the transceiver.
This function is convenient when:

•  Copying the saved data to another IC-7850 to oper

-

ate with the same data.

•  Using  one  IC-7850  by  two  or  more  operators  with 

their own individual data.

Saving the current data is recommended before load-
ing other data into the transceiver.

• Setting load screen

• Confirmation window

 Displays the Setting load screen.

 

q

SET

 [F-7] 

 

SD/USB

 [F-7] 

 

LOAD

 [F-1]

Push [SD/USB](F).

 

w

  •  Push [SD/USB](F) toggles the file load source between 

the card and the flash drive.

 Push [

 

e

∫

](F) or [

√

](F) to select the desired file to be 

loaded.
 Push [LOAD](F).

 

r

  • Opens a confirmation window.
  • To cancel loading, push [CANCEL](F).

 Push [OK](F).

 

t

  •  Loads the data settings of the selected source.
  •  While loading from the card, the indicator to the left of 

the [SD CARD] slot lights.

  •  While loading  from the flash drive, the indicator to the 

right of the [SD CARD] slot lights.

  •  You can change the content to be loaded in the Load set 

screen 

(p. 10-4)

.

    ( SET [F-7] > SD/USB [F-7] > LOAD [F-1] >  

Load Contents)

 After loading ends, reboot the transceiver

 

y

NOTE: 

To complete the loading process, you must 

reboot the transceiver.

Summary of Contents for iC-7850



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands