![background image](http://html.mh-extra.com/html/icom/ic-7850/ic-7850_instruction-manual_612352196.webp)
12-9
12
SCANS
■
∂
F scan
The Multi-function screens are OFF.
Select the VFO mode or a Memory channel.
q
Select the desired operating mode.
w
• The operating mode can also be changed while scan
-
ning.
Push [SCAN](F) .
e
• The Scan screen is displayed.
Push [
r
∂
F SPAN](F) to set the
∂
F span.
• Selectable spans: ±5 kHz, ±10 kHz, ±20 kHz, ±50 kHz,
±100 kHz, ±500 kHz and ±1000 kHz
Set the center frequency of the
t
∂
F span.
Push [
y
∂
F](F).
• The
∂
F scan starts.
•
“
:
F SCAN
”
and decimal points blink while scanning.
• Push [
∂
F](F) to cancel the scan.
• Rotate [MAIN DIAL] also cancels the scan.
• Hold down [RECALL](F) for 1 second to recall the fre
-
quency that is set before starting the scan, if desired.
When the scan detects a signal, the scan stops,
u
pauses or ignores it, depending on the Scan Re-
sume setting and the squelch status.
■
Fine
∂
F scan
In fine scan (programmed or
∂
F), the scan speed de-
creases when the squelch opens, but the transceiver
keeps scanning. The scanning tuning step changes to
10 Hz when the squelch opens.
The Multi-function screens are OFF.
Push [SCAN](F).
q
• The Scan screen is displayed.
Set for
w
∂
F scan as described above.
Push [
e
∂
F](F).
• The
∂
F scan starts.
•
“
:
F SCAN
”
and decimal points blink while scanning.
Push [F-3•FINE].
r
• The Fine
∂
F scan starts.
•
“
FINE
:
F SCAN
”
blinks.
• Push [FINE](F) to cancel the Fine
∂
F scan.
• Push [
∂
F](F) to cancel the scan
• Rotating [MAIN DIAL] also cancels the scan.
• Hold down [RECALL](F) for 1 second to recall the fre
-
quency that is set before starting the scan, if desired.
When the scan detects a signal, the scan speed de-
t
creases but scan does not stop.
[MAIN DIAL]
M-CH [
�
] or [
�
] [V/M]
[EXIT/SET]
(F) Function keys
• While scanning
• While scanning
Blinks
Blinks
Blinks
Blinks