Icom iC-7850 Instruction Manual Download Page 6

Page: 6 / 282

FUNCTIONS AND FEATURES of Adobe® Reader®

The following functions and features can be used with Adobe® Reader®.

• Keyword search

Click “Find (Ctrl+F)” or “Advanced

Search (Shift+Ctrl+F)” in the Edit
menu to open the search screen.

This is convenient when search-

ing for a particular word or phrase
in this manual.

* The Menu screen may differ, de-

pending on the Adobe® Reader®
version.

• Find screen

• Advanced search screen

Click to open the Find or Search
screen or Advanced search screen.

• Printing out the desired pages.

Click “Print...(Ctrl+P)” in File menu, and then select

the paper size and page numbers you want to print.

* The printing setup may differ, depending on the

printer. Refer to your printer’s instruction manual
for details.

* Select “A4” size to print out the page in the equal-

ized size.

• Read Out Loud feature.

The Read Out Loud feature reads aloud the text in

this Instruction Manual.

Refer to the Adobe® Reader® Help for the details.
( This feature may not be usable, depending on your

PC environment including the operating system.)

* The screen may differ, depending on the Adobe® Reader®

version.

Summary of Contents for iC-7850



























































































































































































































































































Search results

Summary of Contents for iC-7850

Reviews:

Brands by name

Popular brands

Icom iC-7850, Instruction Manual

Search results

Summary of Contents for iC-7850

Reviews:

Brands by name

Popular brands