![background image](http://html.mh-extra.com/html/icom/ic-7850/ic-7850_instruction-manual_612352158.webp)
9-3
9
VOICE RECORDER FUNCTIONS
D
Basic recording
You can record both received and transmitted audio.
❍
The Multi-function screens are OFF.
Push [VOICE](F).
q
• The
Voice memory screen
is displayed.
Hold down [QSO REC](F) for 1 second to start voice
w
recording.
• “
” appears while recording.
• “
” appears while recording is paused.
• Recording is continuous until the memory device be
-
comes full.
• If the recording file’s content reaches 2GB, the trans
-
ceiver automatically creates a new file, and continues
recording.
Hold down [QSO REC](F) for 1 second to stop re
-
e
cording.
• “
” disappears.
Push [EXIT/SET].
r
• Exits the
Voice memory screen
.
Convenient!
✓
When the PTT Automatic Recording function is set to
ON in the Voice set mode, the recording automatically
starts when you push [PTT].
D
Quick recording
You can quickly record received audio.
Hold down [REC] for 1 second to start audio record-
➥
ing.
• “
” appears while recording.
• Hold down [REC] for 1 second again to stop recording.
• Push [REC] to record last 15 seconds before pushing
[REC].
[REC]
[EXIT/SET]
(F) Function keys
•
While recording
Appears
■
Recording a QSO
This transceiver consists with a QSO recorder not only
for the received audio, but also for the transmitted au-
dio.
You can record a DX’pedition news, contests and so
on, or your communication contents. The recorded
contents can be saved onto an SD card or USB flash
drive.
There are two ways to record the communication.
NOTE:
• To record a QSO, an SD card or USB flash drive is
required.
• DO NOT insert the SD card or USB flash drive
while recording a QSO. The recording may be in
-
terrupted.
•
After the recording starts, it continues, even if the
transceiver is turned OFF and ON again.