Icom iC-7850 Instruction Manual Download Page 23

Page: 23 / 282

1-7

PANEL DESCRIPTION

MINI SPECTRUM SCOPE KEY [M.SCOPE]

(p. 6-2)

Push to t

➥

urn the Mini spectrum scope screen ON

or OFF.

• You can simultaneously display the Mini spectrum

scope screen with other screens, such as the Memo-
ry or Set mode screens.

Hold down for 1 second to t

➥

urn ON the regular

spectrum scope screen.

VOICE MEMORY RECORD KEY [REC]

Push to store the previous received signal for the

➥

preset time period. This function is called Instant
replay.

(p. 9-7)

• The preset time period can be set in the Voice set

screen.

(p. 9-13)

➥

Hold down for 1 second to record a QSO (Com

munication) audio onto a memory device.

(p. 9-3)

• Hold down again for 1 second to stop recording.
• The recorded memory device can be selected in the

Voice set screen.

(p. 9-13)

VOICE MEMORY PLAY BACK KEY [PLAY]

(pp. 9-2, 9-8)

➥

Push to playback the last 5 seconds of the Instant
replay memory.

• The playback time can be changed in the Voice set

screen.

Hold down for 1 second to playback all of the in-

➥

stant replay memory.

• The recording time can be changed in the Voice set

screen.

EXIT/SET KEY [EXIT/SET]

Push to exit, or return to the previous screen in-

➥

dication during Spectrum scope, Memory, Scan
or Set screen display.
Hold down for 1 second to display the

➥

Set mode

menu screen

(p. 15-3)

MAIN DIAL

Changes the displayed frequency (Main band), se-

lects set mode option, and so on.

MAIN/SUB CHANGE KEY [CHANGE]

(pp. 7-10, 8-7)

Push to toggle the frequency and selected memory

channel between the Main and Sub band readouts.

• When the split frequency function is ON, push to toggle

between the transmit frequency and the receive fre-
quency.

SUB BAND ACCESS KEY [SUB]

Push to select the Sub band readout.

• The Sub band readout frequency is clearly displayed.

MAIN BAND ACCESS KEY [MAIN]

Push to select the Main band readout.

• The Main band readout frequency is clearly displayed.

The Sub band readout functions only during split opera-
tion or Dualwatch.

MAIN/SUB EQUALIZING KEY [M=S]

(p. 8-7)

Hold down for 1 second to equalize the Sub band

readout frequency to the Main band readout fre-
quency.

MEMORY CHANNEL UP/DOWN KEYS [

]/[

]

(p. 11-2)

Push to select the desired memory channel.

• Memory channels can be selected both in the VFO and

the memory modes.

TRANSMIT FREQUENCY CHECK KEY [XFC]

(p. 6-5)

Hold down to monitor the transmit frequency

(includ-

ing

∂

TX frequency offset)

during split frequency op-

eration.

• While holding down, the transmit frequency can be

changed with [MAIN DIAL], keypad, memo pad or [

[

] keys.

• When the split lock function is turned ON, push [XFC] to

cancel the Dial lock function.

(pp. 8-7, 8-8)

RECEIVE INDICATOR [RX]

Lights green while receiving a signal and when the

squelch is open.

SPLIT OPERATION INDICATOR [SPLIT]

(p. 8-7)

Lights white during split frequency operation.

Summary of Contents for iC-7850



























































































































































































































































































Search results

Summary of Contents for iC-7850

Reviews:

Brands by name

Popular brands

Icom iC-7850, Instruction Manual

Search results

Summary of Contents for iC-7850

Reviews:

Brands by name

Popular brands