manualshive.com logo in svg

Icom iC-7850, Instruction Manual

Share
Download
Icom iC-7850 Instruction Manual Download Page 109

5-32

5

RECEIVE AND TRANSMIT

Operating PSK (Continued)

 

■

 

D

Turning ON the PSK log

Turn ON the PSK log to store your PSK operating re-
cord, both TX and RX, onto an SD card or USB flash 
drive.
Be sure to insert an SD card or USB flash drive, other-
wise this function does not work. 

  

q

Display  the  PSK  decode  screen,  then  push 
[<MENU1>](F).

DECODE

 [F-3] 

 

<MENU1>

 [F-1] 

 

Displays <MENU2>

  • The function menu changes to Menu 2.

 Push [LOG](F).

 

w

  • The PSK log set screen is displayed.

 Push [

 

e

p

](F) or [

q

](F) to select the desired item.

  •  When the “PSK LOG” item is set to “ON,” the File type or 

the Storage media cannot be changed. Before starting 
the Log function, set these settings.

Rotate [MAIN DIAL] to select the desired setting.

 

r

  •  Set the “PSK Log File Type” and “PSK Log Storage Me

-

dia” items.

  •  Hold  down  [DEF](F)  for  1  second  to  select  the  default 

setting.

 Select the “PSK Log” item, and then select “ON.”

 

t

  •  To cancel the Log function, select “OFF. ”

Push [EXIT/SET].

 

y

  • Exits the Set screen.

[EXIT/SET] [MAIN DIAL]

(F) Function keys

•

 Fucntion menu (MENU2)

PSK Log  

(Default: OFF)

Starts or Stops making the PSK log file.

• OFF:  The PSK log function is OFF.
• ON:  

 The PSK log is made onto an selected stor

-

age media. Make the log file for each trans-
mission or reception.

PSK Log File Type 

(Default: Text)

Selects file type to make a log file onto a storage me-
dia in the Text or HTML format.

• Text:  The PSK log is saved in the Text format.
• HTML:  The PSK log is saved in the HTML format.

PSK Log Storage Media 

(Default: SD CARD)

Selects the Storage media between an SD card and 
USB flash drive.

Displays after the PSK log starts

Summary of Contents for iC-7850



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands