![background image](http://html.mh-extra.com/html/icom/ic-7850/ic-7850_instruction-manual_612352018.webp)
1-2
1
PANEL DESCRIPTION
q
POWER KEY [POWER]
First, turn ON the internal power supply. The internal
power supply switch is located on the rear panel.
(p. 1-12)
Push to turn ON the transceiver power.
➥
• The [POWER] indicator above this key lights blue.
Hold down for 1 second to turn OFF the power.
➥
• The [POWER] indicator lights orange when the trans
-
ceiver is OFF, but the internal power supply is turned
ON.
w
TRANSMIT KEY [TRANSMIT]
Push to transmit, release to receive.
• The [TX] indicator lights red while transmitting and the
[RX] indicator lights green when the squelch is open.
e
ANTENNA TUNER KEY [TUNER]
Momentarily push to turn the tuner ON or OFF
➥
(bypass.)
• The [TUNER] indicator above this key lights white
when the tuner is turned ON, and goes off when the
tuner is turned OFF (bypassed).
Hold down for 1 second to manually start the
➥
tuner.
•
The [TUNER] indicator blinks red during manual tuning.
• When the tuner cannot tune the antenna, the tuning
circuit is automatically bypassed after 20 seconds.
r
TIMER KEY [TIMER]
Push to turn ON or OFF the sleep or daily timer
➥
function.
• The [TIMER] indicator above this key lights white
when the timer is in use.
Hold down for 1 second to enter the Timer set
➥
screen.
t
HEADPHONE JACK [PHONES]
Connect standard stereo headphones.
• Output power: 50 mW with an 8
Ω
load.
• When headphones are connected, the internal speaker
and any connected external speaker do not function.
y
ELECTRONIC KEYER JACK [ELEC-KEY]
Connect a paddle to activate the internal electronic
keyer for CW operation.
• Select the internal electronic keyer, bug-key or straight
key operation in the Keyer set screen.
• A straight key jack is located on the rear panel. See
• Set the keyer polarity (dot and dash) in the Keyer set
• Eight keyer memory channels can be used.
dash
dot
com
■
Front panel
q
w
e
r
t
y
u
i
o
!0
!1
!2
!3
!4
!5
!6
!8
!9
@1
@2
@0
!7