manualshive.com logo in svg

Icom iC-7850, Instruction Manual

Share
Download
Icom iC-7850 Instruction Manual Download Page 143

7-10

7

FUNCTIONS FOR RECEIVE

 

■

Dualwatch operation

Dualwatch simultaneously monitors two frequencies.
The IC-7850 has 2 independent receiver circuits, the 
Main and Sub bands, so that you can use Dualwatch 
with  no  compromises,  even  on  different  bands  and 
modes.

 Set the desired mode in the Main and Sub bands.

 

q

 Push [DUALWATCH] to select the Dualwatch opera-

 

w

tion.

  •  To equalize the SUB band frequency and mode to that 

of the Main band, hold down [DUALWATCH] for 1 sec-
ond. This 

Quick Dualwatch function can be turned OFF 

in the Others set screen. 

(p. 15-13)

    (SET [F-7] > OTHERS [F-5] > Quick Dualwatch)

 Rotate  [MAIN  DIAL]  or  [SUB  DIAL]  to  set  the  de-

 

e

sired frequency.

Normally, the IC-7850 transmits on the Main band.
During Dualwatch operation, you can transmit on the 
Sub band by doing the following procedures:

• Push [SPLIT] to turn ON the Split function.
•  Push [CHANGE] to switch the settings, such as the oper

-

ating frequency, operating mode, and so on, between the  
Main and Sub bands.

NOTE: 

•  A beat note may be heard, depending on the fre

-

quency combination (3.5 MHz and 7 MHz, and so 
on).

•  Receiver sensitivity may be decreased when the 

same frequency band and the same antenna are 
selected during Dualwatch.

[MAIN DIAL]

[SUB DIAL]

[CHANGE]

[DUALWATCH]

[SPLIT]

• During the Dualwatch operation

•  When  switching  the  settings  between  the  Main 

and Sub bands

• When the Split function is ON

Appears on the SUB band

Summary of Contents for iC-7850



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands