manualshive.com logo in svg

Icom iC-7850, Instruction Manual

Share
Download
Icom iC-7850 Instruction Manual Download Page 226

15-15

15

SET MODE

■

 Others set screen (continued)

SPEECH [MODE] Switch 

(Default: OFF)

Turns the operating mode announcement ON or OFF.

• OFF:  The operating mode is announced.
• ON:     The  operating  mode  is  announcer  when  the  

mode is changed.

Memo Pad Quantity 

(Default: 5)

Sets the number of memo pad channels.

• 5:   5 channels.
• 10:   10 channels.

MAIN DIAL Operation 

(Default: MAIN/SUB)

Selects [MAIN DIAL] operating mode.

• MAIN:        The only Main band frequency can be 

set by rotating [MAIN DIAL].

• MAIN/SUB:   The Sub band frequency can be also 

set by rotating [MAIN DIAL] when the 
Sub band is selected.

MAIN DIAL Auto TS 

(Default: HIGH)

Sets  the  Automatic  Tuning  Step  function  for  [MAIN 
DIAL].
When  rapidly  rotating  [MAIN  DIAL],  the  tuning  step 
is  automatically  changed  according  to  the  rotation 
speed.

• OFF:   Turn OFF the function.
• LOW:  Tuning  step  is  automatically  changed  in  the 

low step.

• HIGH:  Tuning  step  is  automatically  changed  in  the 

high step.

SUB DIAL Auto TS 

(Default: HIGH)

Sets  the  Automatic  Tuning  Step  function  for  [SUB 
DIAL].
When  rapidly  rotating  [SUB  DIAL],  the  tuning  step 
is  automatically  changed  according  to  the  rotation 
speed.

• OFF:   Turn OFF the function.
• LOW:  Tuning  step  is  automatically  changed  in  the 

low step.

• HIGH:  Tuning  step  is  automatically  changed  in  the 

high step.

MAIN/SUB Tracking [MAIN] SW

 

 

(Default: OFF)

Assigns  the  Main/Sub  band  tracking  function  to  the 
[MAIN] key.

• OFF:   The [MAIN] key does not act as the Tracking 

function key.

• ON:     Hold down the [MAIN] key for 1 second to turn 

the function ON or OFF.

      •  Hold down the [SUB] key for 1 second also turns 

the function OFF.

      •  In the tracking mode, rotate [MAIN DIAL] changes 

the MAIN and SUB bands’ frequencies.

         Rotate [SUB DIAL] to change only the SUB band 

frequency.

MIC Up/Down Speed 

(Default: HIGH)

Sets the response speed of [UP]/[DN] on the optional 
microphone.

• LOW:  Slow.
• HIGH:  Fast.

Quick RIT/

∂

TX Clear 

(Default: OFF)

Selects  the  operation  of  [CLEAR]  for  the  RIT/

∂

TX 

function.

• OFF:   Hold down [CLEAR] for 1 second to clear.
• ON:     Push [CLEAR] to clear.

[NOTCH] Switch (SSB) 

(Default: Auto/Manual)

Selects the notch function for the SSB mode.

• Auto:         Auto notch.
• Manual:      Manual notch.
• Auto/Manual:   Auto notch and manual notch can be 

toggled.

[NOTCH] Switch (AM) 

(Default: Auto/Manual)

Selects the notch function for the AM mode.

• Auto:         Auto notch.
• Manual:      Manual notch.
• Auto/Manual:   Auto notch and manual notch can be 

toggled.

DIGI-SEL VR Operation 

(Default: DIGI-SEL)

Selects the function assigned to [DIGI-SEL].

• DIGI-SEL:   Used for the digital selector adjustment.
• APF:       Used  for  the  audio  peak  filter  adjust

-

ment.

Summary of Contents for iC-7850



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands