Icom iC-7850 Instruction Manual Download Page 71

Page: 71 / 282

4-12

BASIC OPERATION

Selecting the Meter readout

■

(Continued)

Selecting the meter type

A total of 3 meter types are selectable.
The meter types are Standard, Edgewise and Bar me-
ters. Follow the instructions to select the meter type.

Select the “Meter Type (Normal Screen)” item in the

Display set screen.

SET

[F-7]



DISPLAY

[F-3]



Meter Type (Normal

screen)

Rotate [MAIN DIAL] to select the option.

Push [EXIT/SET] several times.

• Exits the Set screen.

■

Dial lock function

The Dial lock function prevents frequency changes by
accidental movement of the tuning dial. The lock func-
tion electronically locks the dial.

Push [LOCK].

➥

  • Each push toggles the Dial lock function ON or OFF.
  •  The [LOCK] indicator lights when the function is ON.
  •  [MAIN DIAL] or [SUB DIAL] is locked when the function

is ON.

• Edgewise meter

• Bar meter

(F) Function keys

[MAIN DIAL]

[EXIT/SET]

[LOCK] indicator MAIN, SUB

[SUB DIAL]

[MAIN DIAL]

[LOCK] MAIN, SUB

Summary of Contents for iC-7850



























































































































































































































































































Search results

Summary of Contents for iC-7850

Reviews:

Brands by name

Popular brands

Icom iC-7850, Instruction Manual

Search results

Summary of Contents for iC-7850

Reviews:

Brands by name

Popular brands