Icom iC-7850 Instruction Manual Download Page 98

Page: 98 / 282

5-21

RECEIVE AND TRANSMIT

Confirm the RTTY log contents

You can confirm the RTTY log contents on the trans-
ceiver display.

Display the RTTY decode screen, then push
[<MENU1>](F).

DECODE

[F-3]



<MENU1>

[F-1]



Displays <MENU2>

• The function menu changes to Menu 2.

Push [LOG VIEW](F).

• The RTTY log list screen is displayed.

Push [

](F) or [

](F) to select a desired file.

• “



” is displayed at left of the file name that indicates the

active log making file, so the file cannot be opened.

Push [VIEW](F) to display the log contents.

After checking the log file, push [EXIT/SET] twice.

• Exits the RTTY log list screen.

[EXIT/SET]

(F) Function keys

•

Fucntion menu (MENU2)

•

RTTY log list screen

•

Example: Text format

•

Example: HTML format

•

Functions in the RTTY log list screen

Function

Action

SD/USB

Toggles between an SD card and USB flash
drive.

Selects a log file.

VIEW

Displays the log contents.

• You can see the log contents.

DEL

Hold down for 1 second to display the dialog
box for deleting.

EXPAND

Toggles between the Expanded and normal
screens.

Summary of Contents for iC-7850



























































































































































































































































































Search results

Summary of Contents for iC-7850

Reviews:

Brands by name

Popular brands

Icom iC-7850, Instruction Manual

Search results

Summary of Contents for iC-7850

Reviews:

Brands by name

Popular brands