manualshive.com logo in svg

Icom iC-7850, Instruction Manual

Share
Download
Icom iC-7850 Instruction Manual Download Page 177

10-8

10

USING AN SD CARD OR USB FLASH DRIVE

 

■

Deleting a data file

NOTE: 

Formatting a card or flash drive erases all its 

data. Before formatting any used card, back up its 
data onto your PC.

If you use a brand new SD card, format it by doing the 
following steps.

 Display the SD/USB-Memory set screen.

 

q

SET

 [F-7] 

 

SD/USB

 [F-7]

 Hold down [FORMAT](F) for 1 second.

 

w

  • Opens the “FORMAT” window.

 Push [SD](F) or [USB](F).

 

e

  • Opens the confirmation window.
  • To cancel saving, push [CANCEL](F).

 Push [OK](F).

 

r

  •  After  formatting,  returns  to  the  SD/USB-Memory  set 

screen.

Formatting an 

 

■

SD card or USB flash drive

• When selecting a file to be deleted

• Confirmation window

• Format screen

• Confirmation window

• SD/USB-Memory set screen

NOTE: 

Deleted data from a card or flash drive can-

not  be  restored.  Before  deleting  any  card  or  flash 
drive, back up its data onto your PC.

 Displays the Setting save screen.

 

q

SET

 [F-7] 

 

SD/USB

 [F-7] 

 

SAVE

 [F-2]

Push [SD/USB](F).

 

w

  •  Pushing  [SD/USB](F)  toggles  between  the  card  and 

flash drive that the file to be deleted is stored.

 Push [

 

e

∫

](F) or [

√

](F) to select the desired file to be 

deleted.
 Hold down [SORT/DEL](F) for 1 second.

 

e

  • Opens the confirmation window.
  • To cancel saving, push [CANCEL](F).

 Push [OK](F).

 

r

  •  Deletes the selected file.
  •  While deleting the file in the card, the indicator to the left 

of the [SD CARD] slot blinks.

  •  While deleting the file in the flash drive, the indicator to 

the right of the [SD CARD] slot blinks.

  •  After deleting, returns to the Setting save screen.

Summary of Contents for iC-7850



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands