manualshive.com logo in svg

Icom iC-7850, Instruction Manual

Share
Download
Icom iC-7850 Instruction Manual Download Page 3

ii

IMPORTANT

READ THIS INSTRUCTION MANUAL CAREFULLY

 

before at-

tempting to operate the transceiver.

SAVE THIS INSTRUCTION MANUAL.

 This manual contains important 

safety and operating instructions for the IC-7850.

EXPLICIT DEFINITIONS

WORD

DEFINITION

R

 DANGER!

Personal death, serious injury or an explosion may occur.

R

 WARNING!

Personal injury, fire hazard or electric shock may occur.

CAUTION

Equipment damage may occur.

NOTE

Recommended for optimum use. No risk of personal injury, 
fire or electric shock.

TRADEMARKS

Icom, Icom Inc. and Icom logo are registered trademarks of Icom Incorporated 
(Japan) in Japan, the United States, United Kingdom, Germany, France, Spain, 
Russia, 

Australia, New Zealand,

 and/or other countries.

This  product  includes  “zlib”  open  source  software,  and  is  licensed  according  to  the  open  source  software  li-
cense.
This product includes “libpng” open source software, and is licensed according to the open source software li-
cense.

Refer to the Text files in the License folder of included CD for information on the open source software being used 
by this product.

DISPOSAL

The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in 
the  European  Union,  all  electrical  and  electronic  products,  batteries,  and  accumulators 
(rechargeable batteries) must be taken to designated collection locations at the end of their work-
ing life. Do not dispose of these products as unsorted municipal waste. 
Dispose of them according to the laws in your area.

Summary of Contents for iC-7850



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands