![background image](http://html.mh-extra.com/html/icom/ic-7000/ic-7000_instruction-manual_611322092.webp)
D
Manual notch function
83
5
FUNCTIONS FOR RECEIVE
q
Push
[MNF/ADJ]
for 1 sec. to enter the manual
notch filter set mode.
w
Push
[F-2
NF1
]
or
[F-3
NF2
]
to select the desired
filter ON and OFF.
e
Rotate
[DIAL]
to adjust the selected filter fre-
quency.
• Push
[F-4
NW
]
to toggle the filter width from narrow,
middle and wide.
r
Push
[MNF/ADJ]
(or push
[
Z
(
MENU
/
GRP
)]
) to exit
the manual notch filter set mode.
While adjusting the manual notch filter, noise may
be heard. This comes from the DSP unit and does
not indicate an equipment malfunction.
[MENU/GRP]
[MNF/ADJ]
[F-2] [F-3] [F-4]
[DIAL]
The manual notch function can be used in SSB, CW,
RTTY and AM modes.
➥
Push
[MNF/ADJ]
momentarily to turn the manual
notch function ON and OFF.
• “
” appears when manual notch function is in use.
• Set the frequency for manual notch filtering via the
manual notch filter set mode. (shown below)
• Even when both of the manual notch filters, “
NF1
” and
“
NF2
,” are set to OFF in the manual notch filter set
mode, “
NF1
” is automatically turned ON if the manual
notch function is ON.
[MNF/ADJ]
Appears
D
Manual notch
fi
lter set mode
Summary of Contents for IC-7000
Page 1: ...HF VHF UHF ALL MODE TRANSCEIVER i7000 INSTRUCTION MANUAL ...
Page 164: ...155 MEMO ...
Page 165: ...156 MEMO ...