![background image](http://html.mh-extra.com/html/icom/ic-7000/ic-7000_instruction-manual_611322127.webp)
11
118
PACKET OPERATION
■
Packet operation
q w
e
y
t
r
PIN #/NAME
DESCRIPTION
q
DATA IN
Communication data input.
w
GND
Ground for DATA IN, DATA OUT and AF OUT.
Transmits when grounded.
e
PTTP
When grounded, microphone input (pin 6) of [MIC]
connector will be disconnected.
r
DATA OUT
Outputs 9600 bps receive data.
t
AF OUT
Outputs 1200 bps receive data.
y
SQL
Squelch output.
Goes to ground when squelch opens.
Rear panel view
D
Adjusting the data speed
q
Select
M-3
.
w
Push
[F-4
9600
]
to select the 9600 mode ON and
OFF.
•
“
”
appears when the 9600 mode is activated.
[MENU/GRP]
[F-4]
D
Adjusting the transmit signal output from the TNC
When setting data transmission speed to 9600 bps,
the data signal coming from the TNC is applied ex-
clusively to the internal limiter circuitry to automati-
cally maintain bandwidth.
NEVER
apply data levels from the TNC of over 0.6
Vp-p, otherwise the transceiver will not be able to
maintain the band width and may possibly interfere
with other stations.
NOTE:
Read the instructions supplied with your
TNC carefully before attempting packet operation
with the IC-7000.
1. When using a level meter or synchroscope, adjust
the TX audio level (DATA IN level) from the TNC as
follows.
0.4 Vp-p (0.2 Vrms): recommended level
0.2–0.5 Vp-p (0.1–0.25 Vrms): acceptable level
2. When not using a measuring device.
➀
Connect the IC-7000 to a TNC.
➁
Enter a test mode (“CAL”, etc.) on the TNC, then
transmit some test data.
➂
When the transceiver fails to transmit test data or
transmits sporadically (
[TX]
indicator doesn’t light
red or blinks):
- Decrease the TNC output level until
[TX]
indica-
tor lights red continuously.
When transmission is not successful even though
[TX]
indicator lights red continuously:
-
Increase the TNC output level.
D
Data socket
10
11
Summary of Contents for IC-7000
Page 1: ...HF VHF UHF ALL MODE TRANSCEIVER i7000 INSTRUCTION MANUAL ...
Page 164: ...155 MEMO ...
Page 165: ...156 MEMO ...