Icom IC-7000, Instruction Manual, Page: 48 / 166

D
Convenient functions for receive
4
39
RECEIVE AND TRANSMIT
■
Operating SSB
q
Push
[
Y
(
BAND
)]
/
[
Z
(
BAND
)]
to select the desired
band or push a band key on the HM-151.
w
Push
[MODE]
momentarily or push and hold for
1 sec. to select LSB or USB mode.
• Below 10 MHz LSB is automatically selected; above
10 MHz USB is automatically selected.
e
Rotate
[DIAL]
to tune in a desired signal.
• The S-meter indicates received signal strength when
signal is received.
r
Rotate
[AF]
to set audio to a comfortable listening
level.
t
Push
[PTT]
(microphone) to transmit.
•
[TX]
indicator lights red.
y
Speak into the microphone at your normal voice
level.
• Adjust ‘MIC Gain’ at this step, if necessary. (p. 38)
u
Release
[PTT]
(microphone) to return to receive.
“LSB” or “USB” appears
[
Y
]
[ Z ]
[DIAL]
[MODE] [AF] [TX] indicator
• Preamp and attenuator
(p. 74)
➥
Push
[P.AMP/ATT]
momentarily to tune the pre-
amp ON or OFF.
• “ ” appears when the preamp is set to ON.
➥
Push
[P.AMP/ATT]
for 1 sec. to turn the attenua-
tor ON.
• Push
[P.AMP/ATT]
momentarily to turn the attenuator
OFF.
• “ ” appears when the attenuator is set to ON.
• Twin PBT (passband tuning)
(p. 79)
➥
Push
[PBT/M-ch/RIT]
(switch) momentarily once
or twice to select the twin PBT ON or OFF (M-ch
RIT).
• PBT indicator lights green when the twin PBT is se-
lected.
➥
Rotate
[PBT/M-ch/RIT]
(controls–inner/outer).
• Push
[PBT/M-ch/RIT(
CLR
)]
to clear the settings.
• AGC (auto gain control)
(p. 76)
➥
While “ M-3 ” is selected, push
[F-3
AGC
]
momen-
tarily one or more times to select AGC fast, AGC
middle and AGC slow.
• “ ,” “ ” and “ ” appears when the
fast time constant, middle time constant and slow
time constant is selected, respectively.
➥
While “
M-3
” is selected, push
[F-3
AGC
]
for 1
sec. to enter the AGC set mode.
• Push
[F-2
FAST
]
,
[F-3
MID
]
or
[F-4
SLOW
]
to select
the time constant, then rotate
[DIAL]
to adjust the time
constant.
• Noise blanker
(p. 80)
➥
Push
[NB/ADJ]
to turn the noise blanker ON and
OFF.
• “ ” appears when the noise blanker is set to ON.
➥
Push
[NB/ADJ]
for 1 sec. to enter the noise
blanker set mode, then rotate
[DIAL]
to adjust the
threshold level, or noise pulse width.
• DSP noise reduction
(p. 81)
➥
Push
[NR/LEV]
to turn the DSP noise reduction
ON and OFF.
• “ ” appears when the DSP noise reduction is ON.
➥
Push
[NR/LEV]
for 1 sec. to enter the DSP noise
reduction level set mode, then rotate
[DIAL]
to
adjust the DSP noise reduction level.
• Manual notch fi lter
(pgs. 82, 83)
➥
Push
[MNF/ADJ]
to turn the manual notch filter
ON and OFF.
• “ ” appears when the manual notch filter is set to ON.
➥
Push
[MNF/ADJ]
for 1 sec. to enter the manual
notch filter set mode.
• Push
[F-2
NF1
]
,
[F-3
NF2
]
to select the notch filter,
push
[F-4
NW
]
to set the filter width, rotate
[DIAL]
to
set the notch frequency.
• Auto notch fi lter
(p. 82)
➥
Push
[ANF/ • REC]
to turn the auto notch filter ON
and OFF.
• “ ” appears when the auto notch filter is set to ON.
• VSC (voice squelch control)
(p. 84)
➥
While “
S-1
” is selected, push
[F-4
VSC
]
to turn
the VSC function ON and OFF.
• “ ” appears when VSC function is set to ON.
• Push and hold
[MENU/GRP]
for 1 sec. once or twice
to select the menu group
M
.
• Push
[MENU/GRP]
momentarily one or more times
to select the menu
M-3
.