Icom IC-7000, Instruction Manual, Page: 158 / 166

149
17
CONTROL COMMAND
D
Character’s code for my call
D
Codes for memory name contents
To send or read the desired memory name settings, the char-
acter codes, instructed codes for memory keyer contents as
above, and follows are additionally used.
•
Character’s code— Alphabetical characters
•
Character’s code— Symbols
D
Split/Duplex frequency setting
The following data sequence is used when sending/reading
the split or duplex frequency setting.
D Repeater tone/tone squelch frequency
setting
The following data sequence is used when sending/reading
the DTCS code and polarity setting.
D
DTCS code and polarity setting
The following data sequence is used when sending/reading
the DTCS code and polarity setting.
Fixed digit: 0 1st digit: 0–7 2nd digit: 0–7 3rd digit: 0–7 Transmit polarity: 0= Normal 1= Reverse Receive polarity: 0= Normal 1= Reverse
q
X X 0 X X
w e
X
100Hz digit: 0–2 10 Hz digit: 0–9 1 Hz digit: 0–9 0.1 Hz digit: 0–9 Fixed digit: 0* Fixed digit: 0*
q *
0 0 X X X
w e
X
*Not necessary when setting a frequency.
1 kHz digit: 0—9 100 Hz digit: 0 (fixed) 100 kHz digit: 0—9 10 kHz digit: 0—9 10 MHz digit: 0 (fixed) 1 MHz digit: 0—4 Direction: 00=+ direction 01=— direction
q
0 X X X X XX
w e
0
r *
*No need to enter for duplex frequency setting.
Character ASCII code Character ASCII code
a–z 61–7A — —
Character ASCII code Character ASCII code
! 21 # 23
$ 24 % 25
& 26 ¥ 5C
? 3F ” 22
’ 27 ` 60
+ 2B – 2D
: 3A ; 3B
= 3D < 3C
> 3E ( 28
) 29 [ 5B
] 5D { 7B
} 7D | 7C
_ 5F
–
7E
@ 40
Character ASCII code Description
0–9 30–39 Numerals
A–Z 41–5A Alphabetical characters
space 20 Word space
– 2D Symbol
. 2E Symbol
/ 2F Symbol