Icom IC-7000, Instruction Manual, Page: 116 / 166

107
8
MEMORY OPERATION
D
Memory names
All memory channels (including scan edges) can be
tagged with alphanumeric names of up to 9 charac-
ters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ’ ` ^ + –
✱
/ . , : ; = < > ( ) [ ] { } | _
_
@)
and spaces can be used.
• Editing (programming) memory names
q
Select the menu M-2 .
w
Push
[F-4
V/M
]
to select memory mode.
e
Push
[F-1]
( MEM , LST ) twice to enter the memory
channel list.
r
Push
[PBT/M-ch/RIT]
momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
•
[PBT/M-ch/RIT]
indicator (Green) goes out.
t
Rotate
[M-ch]
(inner) control to select the desired
memory channel.
• All memory channels including blank channels can be
selected.
•
[ Y ]
/
[ Z ]
on the microphone also changes the channels.
y
Push
[F-2
NAM
]
to edit memory channel name.
• A cursor appears and blinks.
• Memory channel names of blank channels cannot be
edited.
u
Push
[
Y
(
MENU
/
GRP
)]
several times to select the de-
sired character group.
•
[ABC]
,
[abc]
,
[123]
or
[etc]
indicates the capital letters,
small letters, numerals or symbols, respectively
i
Input the desired character by rotating
[DIAL]
.
• Push
[F-1
Å
]
or
[F-2
Ç
]
for cursor movement.
• Push
[F-3
DEL
]
to delete the selected character.
• Push
[F-4
SPC
]
to input a space.
• Pushing the HM-151’s keypad,
[0]
–
[9]
, can also enter
numerals.
o
Push
[
Z
(
MENU
/
GRP
)]
to input and set the name.
• The cursor disappears.
!0
Repeat steps
t
to
o
to program another memory
channel’s name, if desired.
!1
Push
[ Z (
MENU
/
GRP
)]
twice to exit the memory
channel list.
Push
Rotate
NAM
Push
Ç
Selected character
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[DIAL] [MENU/GRP]
[F-1]
[F-2] [F-3] [F-4]
Menu group selection
Push
[MENU/GRP]
for 1 sec.
Selection from:
M
,
S
or
G
(Graphic)
Menu selection (Example: M)
Push
[MENU/GRP]
momentarily.
Selection from:
M-1
,
M-2
or
M-3
Either
Y or Z
Either
Y or Z