Icom IC-7000, Instruction Manual, Page: 112 / 166

103
8
MEMORY OPERATION
q
Push
[PBT/M-ch/RIT]
momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
•
[PBT/M-ch/RIT]
indicator (Green) goes out.
w
Set the desired frequency and operating mode in
VFO mode.
• If you want to program the split frequency function, pro-
gram both receive and transmit frequencies into VFO
A and B, then turn ON the split function. (p. 91)
• If you want to program a repeater function, set a tone
frequency (p. 60) in addition to the receive/transmit fre-
quencies.
e
Select the menu
M-2
.
r
Push
[F-1
MEM
]
to display the memory channel
contents.
• Memory channel contents appear above the multi-func-
tion key indicator.
• Push
[F-1
LST
]
to display the memory channel list.
This is convenient for selecting the desired channel.
Push
[ Z (
MENU
/
GRP
)]
to exit the memory channel list.
t
Rotate
[M-ch]
to select the desired memory chan-
nel.
• “ ” and “---,---,--” appear if the selected memory
channel is a blank channel (and does not have con-
tents).
• Rotating
[RIT]
(outer) control changes the bank.
y
Push
[F-2
MW
]
for 1 sec. to program the displayed
frequency and operating mode into the selected
memory channel.
To check the programmed contents, push
[F-4
V/M
]
to select memory mode.
[EXAMPLE]: Programming 7.088 MHz/LSB into ch 12.
Push for
1 sec.
MW
[F-2]
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[MENU/GRP]
[RIT] (outer) control
■
Memory programming
D
Programming in VFO mode
Memory channel programming can be performed ei-
ther in VFO mode or in memory mode.
Menu group selection
Push
[MENU/GRP]
for 1 sec.
Selection from:
M
,
S
or
G
(Graphic)
Menu selection (Example: M)
Push
[MENU/GRP]
momentarily.
Selection from:
M-1
,
M-2
or
M-3
Either
Y or Z
Either
Y or Z