Icom IC-7000, Instruction Manual, Page: 11 / 166

✔
What is the PBT control?
PBT electronically narrows the IF passband width to reject
interference. This transceiver uses DSP to implement PBT.
➥
While M-ch/RIT is selected:
●
●
Rotate the inner control to select a memory
channel number (p. 102).
● ●
Push inner control for 1 sec. to turn the
RIT/
∂
TX mode ON (pgs. 75, 88).
• Push
[
Z
(
MENU
/
GRP
)]
to exit the RIT/
∂
TX mode.
● ●
While the RIT/
∂
TX mode is OFF:
Rotates outer control to select a memory bank
(p. 106).
●
●
While the RIT/
∂
TX is ON:
Rotate outer control to shift the receive or
transmit frequency (pgs. 75, 88).
• “ ” or “ ” indicators appear when the RIT or
∂
TX function is activate, respectively.
• The shift frequency range is ± 9.999 kHz in 1 Hz
steps (or ±9.99 kHz in 10 Hz steps).
• When the RIT or
∂
TX function is ON, push and
hold
[F-1
RIT
]
or
[F-2
∂TX
]
for 1 sec. to add or
subtract the frequency shift to the display fre-
quency.
✔
What is the RIT function?
RIT (Receiver Incremental Tuning) shifts the receive fre-
quency without shifting the transmit frequency.
This is useful for fine tuning for stations calling you off fre-
quency or when you prefer to listen to slightly different-
sounding voice characteristics, etc.
✔ What is the
∂
TX function?
The
∂
TX shifts the transmit frequency without shifting the re-
ceive frequency. This is useful for simple split frequency op-
eration in CW, etc.
y TWIN PBT (M-ch/RIT) INDICATOR
(pgs. 75, 79, 88, 102)
➥
Indicates the status of
[PBT/M-ch/RIT]
(
t
) acti-
vates as the Twin PBT function or memory chan-
nel/RIT control.
• Indicator is green when the Twin PBT is selected.
• Indicator is off when the M-ch/RIT is selected.
• Indicator is orange when the RIT or
∂
TX function is
activate.
u
MENU/GROUP KEYS [MENU/GRP]
(p. 153)
➥
Push either key one or more times to select
menus within a menu group (
M , S or G (Graphic)).
➥
Push and hold for 1 sec. to select one of the three
menu groups:
M-1
to
M-3
,
S-1
to
S-3
and
G-1
(Scope) to
G-3
(SWR meter).
i TUNER/CALL KEY [TUNER/CALL]
➥
During HF/50 MHz operation (p. 116):
●
●
Push momentarily to toggle the automatic an-
tenna tuner function ON and OFF.
• An optional antenna tuner must be connected.
• “
” indicator appears when the tuner is ON.
●
●
Push and hold for 2 sec. to manually tune the
antenna.
• An optional antenna tuner must be connected.
• “
” indicator appears when the tuner is ON.
➥
During 144/430 MHz operation (p. 102):
Push momentarily to select the call channel (or
return to the previous channel/frequency when
the call channel is already selected).
• “C1” is the 144 MHz call channel and “C2” is the 430
MHz call channel.
o MULTI-FUNCTION KEYS [F-1]/[F-2]/[F-3]/[F-4]
➥
Push to select the function indicated in the LCD
display above these keys. (pgs. 5–8, 153)
• Functions vary depending on the active menu.
Functions appear
M-ch
RIT
M-ch
RIT
Frequency
decreases Frequency
increases Channel
decreases Channel
increases
2
1
PANEL DESCRIPTION
1
See the illustration of the Front panel on page i-2.