Icom IC-7000, Instruction Manual, Page: 39 / 166

30
3
BASIC OPERATION
3
D Programmable tuning step
The operating frequency can be changed in steps of
(0.01 (AM/FM/WFM only), 0.1, 1, 5, 9, 10, 12.5, 20 25
or 100 kHz selectable) for quick tuning.
q
Push
[TS]
momentarily to turn the programmable
tuning function ON.
• “
Z
” appears when the programmable tuning function is
ON.
w
Rotate
[DIAL]
to change the frequency in pro-
grammed kHz steps.
e
Push
[TS]
again to turn the programmable tuning
function OFF.
• “
Z
” disappears.
r
Rotate
[DIAL]
for normal tuning, if desired.
Programmable tuning step indicator
[TS] [DIAL]
Appears
D
Selecting “kHz” step
Programmable tuning steps are available to suit your
operating requirements.
These tuning steps are:
• Independently selectable for each mode
• Selectable from 0.01 (AM/FM/WFM only), 0.1, 1, 5,
9, 10, 12.5, 20, 25 and 100 kHz
q
Push
[TS]
momentarily to turn the programmable
tuning step ON.
• “
Z
” appears when the programmable tuning function is
ON.
w
Push
[TS]
for 1 sec. to enter the tuning step set-
ting display.
• The tuning step setting for the selected mode appears.
e
Select the desired operating mode with
[MODE]
.
(see p. 34)
r
Rotate
[DIAL]
to select the desired tuning step
from 0.01 (FM/WFM/AM only), 0.1, 1, 5, 9, 10,
12.5, 20, 25 or 100 kHz.
• Push
[F-4
DEF
]
for 1 sec. to return to the default set-
ting, if desired.
t
Repeat steps
e
and
r
to select the “kHz” tuning
steps for other modes, if desired.
y
Push
[TS]
(or
[
Z
(
MENU
/
GRP
)]
) to exit the setting
display.
Appears
[TS] [MODE] [DIAL]