![background image](http://html.mh-extra.com/html/icom/ic-7000/ic-7000_instruction-manual_611322154.webp)
• Command table (continued)
0E
B0
Set as non-select channel
B1
Set as select channel
D0
Set scan resume OFF
D3
Set scan resume ON
0F
00
Turn the split function OFF
01
Turn the split function ON
10
Select simplex operation
11
Select –DUP operation
12
DUP operation
10
00
AM/FM/WFM modes:
Select 10 Hz (1 Hz) tuning step
SSB/CW/RTTY modes: TS OFF
01
Select 100 Hz tuning step
02
Select 1 kHz tuning step
03
Select 5 kHz tuning step
04
Select 9 kHz tuning step
05
Select 10 kHz tuning step
06
Select 12.5 kHz tuning step
07
Select 20 kHz tuning step
08
Select 25 kHz tuning step
09
Select 100 kHz tuning step
10
AM/FM/WFM modes:
Select MHz step
SSB/CW/RTTY modes: TS OFF
11
—
Select/read attenuator (0=OFF,
12=ON (12 dB))
13
00
Announce with voice synthesizer
01
(00=all data; 01=frequency and
02
S-meter level; 02=receive mode)
14
01 + Level data
[AF]
level setting (0=max. CCW to
255=max. CW)
02 + Level data
[RF]
level setting (0=max. CCW to
255=11 o’clock)
03 + Level data
[SQL]
level setting (0=11 o’clock to
255=max. CW)
06 + Level data
NR level setting (0=min. to
255=max.)
07 + Level data
Inside
[PBT]
setting or IF shift
setting (0=max. CCW, 128=cen-
ter, 255=max. CW)
08 + Level data
Outside
[PBT]
setting
(0=max. CCW, 128=center,
255=max. CW)
09 + Level data
CW Pitch setting (0=300 Hz,
128=600 Hz, 255=900 Hz, in 5 Hz
steps)
0A + Level data
RF Power setting (0=mini. to
255=max.)
0B + Level data
MIC Gain setting (0=mini. to
255=max.)
0C + Level data Key Speed setting (0=slow to
255=fast)
0D + Level data NOTCH (NF1) frequency setting
(0=low freq. to 255=high freq.)
0E + Level data
COMP Level setting (0=0 to
10=10)
0F + Level data
Break-IN DELAY setting (20=2.0d
to 130=13.0d)
12 + Level data
NB
level setting (0=0 to
255=100%)
15 + Level data
Monitor gain setting (0=0 to
255=100%)
16 + Level data
VOX gain setting (0=0 to
255=100%)
14
17 + Level data
Anti-VOX gain setting (0=0 to
255=100%)
18 + Level data
Contrast (LCD) setting (0=0 to
255=100%)
19 + Level data
Bright (LCD) setting (0=0 to
255=100%)
1A + Level data
NOTCH (NF2) frequency setting
(0=low freq. to 255=high freq.)
15
01
Read squelch condition
02
Read S-meter level
11
Read RF power meter
12
Read SWR meter
13
Read ALC meter
14
Read COMP meter
16
02
Preamp (0=OFF; 1=ON)
12
AGC selection (0=OFF; 1=Slow;
2=Mid; 3=Fast)
22
Noise blanker (0=OFF; 1=ON)
40
Noise reduction (0=OFF; 1=ON)
41
Auto notch (0=OFF; 1=ON)
42
Repeater tone (0=OFF; 1=ON)
43
Tone squelch (0=OFF; 1=ON)
44
Speech compressor (0=OFF; 1=ON)
45
Monitor (0=OFF; 1=ON)
46
VOX function (0=OFF; 1=ON)
47
Break-in (0=OFF; 1=semi break-
in; 2=full break-in)
48
Manual notch (NF1) (0=OFF; 1=ON)
4B
DTCS (0=OFF; 1=ON)
4C
VSC (0=OFF; 1=ON)
4F
Twin Peak Filter (0=OFF; 1=ON)
50
Dial lock function (0=OFF, 1=ON)
51
Manual notch (NF2) (0=OFF, 1=ON)
19
00
Read the transceiver ID
1A
00
Send/read memory contents (see
p. 148 for details)
01
Send/read band stacking register
contents (see p. 148 for details)
02
Send/read memory keyer contents
(see p. 148 for details)
03
Send/read the selected filter width
(SSB, CW, RTTY: 0=50 Hz to
31=2700 Hz; AM: 0=200 Hz to
49=10 kHz)
04
Send/read the selected AGC time
constant (0=OFF, 1=0.1/0.3 sec. to
13=6.0/8.0 sec.)
050001
RF Power setting (0=mini. to
255=max.)
050002
MIC Gain setting (0=mini. to
255=max.)
050003
Send/read of SSB TX bandwidth
(lower edge) for wide
(0=100, 1=200, 2=300, 3=500 HZ)
050004
Send/read of SSB TX bandwidth
(higher edge) for wide (0=2500,
1=2700, 2=2800, 3=2900 HZ)
050005
Send/read of SSB TX bandwidth
(lower edge) for middle
(0=100, 1=200, 2=300, 3=500 HZ)
050006
Send/read of SSB TX bandwidth
(higher edge) for middle (0=2500,
1=2700, 2=2800, 3=2900 HZ)
Command
Sub command
Description
Command
Sub command
Description
145
17
CONTROL COMMAND
Summary of Contents for IC-7000
Page 1: ...HF VHF UHF ALL MODE TRANSCEIVER i7000 INSTRUCTION MANUAL ...
Page 164: ...155 MEMO ...
Page 165: ...156 MEMO ...