![background image](http://html.mh-extra.com/html/icom/ic-7000/ic-7000_instruction-manual_611322049.webp)
40
4
RECEIVE AND TRANSMIT
4
D
Convenient functions for transmit
• Transmit quality monitor
(p. 89)
➥
Push
[AF(
SET
)]
, then
[F-4
OTH
]
to enter the mis-
cellaneous (others) set mode. Select an item with
[F-1
≤
]
/
[F-2
≥
]
, then rotate
[DIAL]
to turn the
monitor function ON and OFF.
• VOX (voice operated transmit)
(p. 85)
➥
While “
M-3
” is selected, push
[F-1
VOX
]
to turn
the VOX function ON and OFF.
• “
” appears when the VOX function is set to ON.
➥
While “
M-3
” is selected, push
[F-1
VOX
]
for 1
sec. to enter the VOX set mode.
• Push
[F-1
≤
]
/
[F-2
≥
]
to select an item.
• Rotate
[DIAL]
to set the value/conditions.
• Speech compressor
(p. 89)
➥
While “
M-3
” is selected, push
[F-2
COM
]
to turn
the speech compressor ON and OFF.
• “
” appears when the speech compressor is set to
ON.
➥
While “
M-3
” is selected, push
[F-2
COM
]
for 1
sec. to enter the compression level set mode.
• Rotate
[DIAL]
to adjust the compression level.
• Push and hold
[MENU/GRP]
for 1 sec. once or twice
to select the menu group
M
.
• Push
[MENU/GRP]
momentarily one or more times
to select the menu
M-3
.
D
About 5 MHz band operation (USA version only)
Operation on the 5 MHz band is allowed on 5 discrete
frequencies and must adhere to the following:
• USB mode
• Maximum of 50 watts ERP
(Effective Radiated Power)
• 2.8 kHz bandwidth
It is the operator’s responsibility to set all controls so
that the transmission in this band meets the stringent
conditions under which we may use these frequencies.
NOTE:
We recommend that you store these fre-
quencies, mode and filter settings into the memory
channel for easy recall.
*The channel center frequencies that are specified
by the FCC, show the center frequency of their
passband. However, the IC-7000 displays carrier
point frequency, so set 1.5 kHz below from FCC
channel center frequency.
IC-7000 Tuning
FCC Channel
Frequency*
Center Frequency*
5.33050 MHz
5.33200 MHz
5.34650 MHz
5.34800 MHz
5.36650 MHz
5.36800 MHz
5.37150 MHz
5.37300 MHz
5.40350 MHz
5.40500 MHz
To assist you in operating the 5 MHz band correctly
within the rules specified by the FCC, transmission
is impossible on any 5 MHz band frequency other
than the 5 frequencies indicated in the table above.
Summary of Contents for IC-7000
Page 1: ...HF VHF UHF ALL MODE TRANSCEIVER i7000 INSTRUCTION MANUAL ...
Page 164: ...155 MEMO ...
Page 165: ...156 MEMO ...