![background image](http://html.mh-extra.com/html/icom/ic-7000/ic-7000_instruction-manual_611322044.webp)
35
3
BASIC OPERATION
■
Squelch and receive (RF) sensitivity
Adjusts the RF gain and squelch threshold level. The
squelch removes noise output from the speaker
(closed position) when no signal is received.
• The squelch is particularly effective for FM. It is also avail-
able for other modes.
• The 12 to 1 o’clock position is recommended for any set-
ting of the
[RF/SQL]
control.
• The control can be set as ‘Auto’ (RF gain control in SSB,
CW and RTTY; squelch control in AM, FM and WFM (RF
gain is fixed at maximum) in the miscellaneous (others)
set mode as follows (p. 131).
Adjusting RF gain
(Receive sensitivity)
Normally,
[RF/SQL]
is set to the 11 o’clock position.
Rotate
[RF/SQL]
to the 11 o’clock position for maxi-
mum sensitivity.
• Rotating counterclockwise from the maximum position re-
duces sensitivity.
• The S-meter indicates receive sensitivity.
Adjusting squelch
(Removing non-signal noise)
Rotate
[RF/SQL]
clockwise when receiving no signal,
until the noise just disappears.
•
[RX]
indicator light goes out.
• Rotating
[RF/SQL]
past the threshold point invokes the S-
meter squelch—this allows you to set a minimum signal
level needed to open the squelch.
• When setting as RF gain/squelch control
•When functioning as RF gain control
(Squelch is fixed open; SSB, CW, RTTY only)
•When functioning as squelch control
(RF gain is
fixed at maximum)
While rotating the RF gain control, noise may be
heard. This comes from the DSP unit and does not
indicate an equipment malfunction.
Squelch is
open.
S-meter
squelch
S-meter squelch
threshold
Noise squelch
threshold
(FM/WFM mode)
Lowest threshold
Highest threshold
Noise squelch (FM/WFM mode)
Minimum RF gain
Adjustable
range
Maximum RF gain
Recommended level
RF gain
adjustable
range
Maximum
RF gain
S-meter shows
squelch level
Noise squelch (FM/WFM mode)
Squelch is
open.
[RF/SQL]
SETTING
OPERATION
RF+SQL
Can be used in all modes.
(default)
Functions as noise squelch or S-meter
squelch in AM, FM and WFM modes;
S-meter squelch only in other modes.
SQL
Operates as a squelch control.
• RF gain is fixed at maximum sensitivity.
Operates as an RF gain control in
SSB, CW and RTTY modes.
AUTO
• Squelch is fixed open.
Operates as a squelch control in AM,
FM and WFM modes.
• RF gain is fixed at maximum sensitivity.
Summary of Contents for IC-7000
Page 1: ...HF VHF UHF ALL MODE TRANSCEIVER i7000 INSTRUCTION MANUAL ...
Page 164: ...155 MEMO ...
Page 165: ...156 MEMO ...