Icom IC-7000, Instruction Manual, Page: 68 / 166

59
4
RECEIVE AND TRANSMIT
■
Operating FM
q
Push
[
Y
(
BAND
)]
/
[
Z
(
BAND
)]
to select the desired
band or push a band key on the HM-151.
w
Push
[MODE]
momentarily or push and hold for 1
sec. to select FM mode.
• After FM, WFM or AM mode is selected, push
[MODE]
for 1 sec. to select from FM, WFM and AM modes.
e
Rotate
[DIAL]
to tune in a desired signal.
• The S-meter indicates received signal strength when a
signal is received.
• The default tuning step for FM mode is 1 kHz; this can
be changed using the tuning step program mode. (p. 30)
r
Rotate
[AF]
to set audio to a comfortable listening
level.
t
Push
[PTT]
(microphone) to transmit.
•
[TX]
indicator lights red.
y
Speak into the microphone at your normal voice
level.
• Adjust ‘MIC Gain’ at this step, if necessary. (p. 38)
u
Release
[PTT]
(microphone) to return to receive.
“FM” appears
[ Y ]
[ Z ]
[DIAL]
[MODE] [AF] [TX] indicator
D Convenient functions for receive
• Preamp and attenuator
(p. 74)
➥
Push
[P.AMP/ATT]
momentarily to turn the pre-
amp ON or OFF.
• “ ” appears when the preamp is set to ON.
➥
Push
[P.AMP/ATT]
for 1 sec. to turn the attenua-
tor ON.
• Push
[P.AMP/ATT]
momentarily to turn the attenuator
OFF.
• “ ” appears when the attenuator is set to ON.
• Auto notch fi lter
(p. 82)
➥
Push
[ANF/ • REC]
to turn the auto notch filter ON
and OFF.
• “ ” appears when the auto notch filter is set to ON.
• DSP noise reduction
(p. 81)
➥
Push
[NR/LEV]
to turn the DSP noise reduction
ON and OFF.
• “ ” appears when the DSP noise reduction is set to
ON.
➥
Push
[NR/LEV]
for 1 sec. to enter the noise re-
duction level set mode, then rotate
[DIAL]
to ad-
just the DSP noise reduction level.
• VSC (voice squelch control)
(p. 84)
➥
While “
S-1
” is selected, push
[F-4
VSC
]
to turn
the VSC function ON and OFF.
• “ ” appears when VSC function is set to ON.
D Convenient functions for transmit
• VOX (voice operated transmit)
(p. 85)
➥
While “
M-3
” is selected, push
[F-1
VOX
]
to turn
the VOX function ON and OFF.
• “VOX” appears when the VOX function is set to ON.
➥
While “ M-3 ” is selected, push
[F-1
VOX
]
for 1
sec. to enter the VOX set mode.
• Push
[F-1
≤
]
/
[F-2
≥
]
to select an item.
• Rotate
[DIAL]
to set the value/conditions.
• Transmit quality monitor
(p. 89)
➥
Push
[AF(
SET
)]
, then
[F-4
OTH
]
to enter the mis-
cellaneous (others) set mode. Select an item with
[F-1
≤
]
/
[F-2
≥
]
, then rotate
[DIAL]
to turn the
monitor function ON and OFF.
• Push and hold
[MENU/GRP]
for 1 sec. once or twice
to select the menu group M .
• Push
[MENU/GRP]
momentarily one or more times
to select the menu M-3 .