Icom IC-7000, Instruction Manual, Page: 60 / 166

■
Operating RTTY (FSK)
When using your RTTY terminal or TNC, consult the
manual that comes with the RTTY terminal or TNC.
q
Push
[
Y
(
BAND
)]
/
[
Z
(
BAND
)]
to select the desired
band or push a band key on the HM-151.
w
Push
[MODE]
momentarily to select RTTY mode.
• After RTTY mode is selected, push
[MODE]
for 1 sec.
to toggle between RTTY and RTTY-R modes.
e
Display the RTTY decoder screen.
• Push
[F-2
DEC
]
to display the Baudot decoder screen.
r
Rotate
[DIAL]
to simultaneously tune a desired sig-
nal.
• Use
[F-2
1/4
]
in the
M-3
display when critical setting
is required.
• S-meter indicates received signal strength when signal
is received.
• If the received signal cannot be demodulated, try se-
lecting RTTY-R mode (or RTTY mode).
t
Transmit a SEND signal from your TNC.
•
[TX]
indicator lights red.
• The Po meter indicates transmitted RTTY signal
strength.
y
Operate the connected PC or TNC (TU) to trans-
mit RTTY (FSK) signals.
“RTTY” or “RTTY-R” appears
[ Y ]
[
Z
]
[DIAL]
[MODE] [AF] [TX] indicator
[MENU/GRP] [F-2]
• Push and hold
[MENU/GRP]
for 1 sec. once or twice
to select the menu group
S
.
• Push
[MENU/GRP]
momentarily one or more times to
select the menu
S-1
.
51
4
RECEIVE AND TRANSMIT