Icom IC-7000, Instruction Manual, Page: 50 / 166

41
4
RECEIVE AND TRANSMIT
■
Operating CW
q
Connect a paddle or straight key as on page 22.
w
Push
[
Y
(
BAND
)]
/
[
Z
(
BAND
)]
to select the desired
band or push a band key on the HM-151.
e
Push
[MODE]
momentarily to select CW mode.
• After CW mode is selected, push
[MODE]
for 1 sec. to
toggle between CW and CW-R modes.
r
Rotate
[DIAL]
to tune in a desired signal with the
desired tone frequency.
t
Rotate
[AF]
to set audio to a comfortable listening
level.
y
Set CW break-in operation as semi break-in, full
break-in or OFF.
• Push
[F-1
BRK
]
one or more times to select the CW
break-in operation.
• “ ,” “ ,” and “OFF (no indication)” appears.
➧
BK-IN : semi break-in
➧
F-BK : full break-in
➧
OFF : no break-in (ACC socket connection is neces-
sary as shown on page 22.)
u
Set the CW delay time when semi break-in opera-
tion is selected.
• Push
[F-1
BRK
]
for 1 sec. to enter the break-in delay
time set mode.
• Rotate
[DIAL]
to set the desired delay time.
i
Set CW setting in the keyer set mode ( S-1 ).
• Push
[F-2
KEY
]
,
[
Z
(
MENU
/
GRP
)]
, then
[F-4
SET
]
to
enter the keyer set mode. (p. 49)
o
Keying to transmit, use the electric keyer or paddle
to send your CW signals.
•
[TX]
indicator lights red.
• The Po meter indicates transmitted CW signal strength.
!0
Stop keying to return to receive.
Delay time of 7.5 dots is selected
for semi break-in operation.
Semi break-in operation is selected.
Appears
“CW” or “CW-R” appears
[
Y
]
[ Z ]
[DIAL]
[MODE] [AF] [TX] indicator
[MENU/GRP] [F-4] [F-1] [F-2]
• Push and hold
[MENU/GRP]
for 1 sec. once or twice
to select the menu group
S
.
• Push
[MENU/GRP]
momentarily one or more times to
select the menu
S-1
.
• Push and hold
[MENU/GRP]
for 1 sec. once or twice
to select the menu group
M
.
• Push
[MENU/GRP]
momentarily one or more times to
select the menu
M-3
.