Application Guide - NP900 Series
281 (504
)
A996A
Figure 3.3.7-136 Communication settings for the RTD module.
After the communication is set the wanted channels are selected from the ModbusIO tab
under “Protocols”. There are three separate modules available for selection.
Figure 3.3.7-137 Set up of the measurement module.
Used measurement module is selected first and the poll address. Module type needs to
be set also as well as the polled channels.
In case of thermocouple module the thermo element type needs to be set per each
measurement channel. After these settings the RTD:s are available for other functions.
