Appendix A. Command line interface reference
599
broadcast broadcast
Set the broadcast address. An explicit value may be given in the conventional
way, for example 192.112.28.255. Alternatively, the special values listed in the
Table above may be entered. These will look at the current address and netmask
and deduce the value to use. The value
high
sets all of the bits in the host part
and the value
low
clears them.
This command may be combined with the
ip
and
netmask
commands on a single
line. The
ip
command describes the default value for this option if just the IP
number is changed
If DHCP is enabled this command changes the stored value which will be used if
DHCP is disabled. It does not change the actual value of the interface if DHCP is
enabled otherwise it resets the interface.
info
Show the details about the interface. This includes:
IP number
Netmask
Broadcast address
MAC address
Whether DHCP is enabled
Whether it is configured (up)
The interface's speed
If DHCP is enabled the output will show the active values for the interface plus
the values which will be applied if DHCP is disabled.
dhcp enable | disable
Either enable or disable DHCP depending on the value of the
boolean
parameter.
ip ip_address [ip_mask]
Specify the IP number for the interface.
speed
10 | 100 | auto
administrator
statistics
all
Up
administrator
Command
Parameters
Levels
Summary of Contents for TotalStorage DS300
