IBM TotalStorage DS300, Best Practices Manual, Page: 563 / 680

Chapter 9. TotalStorage DS400 installation
545
Figure 9-143 Initiator information
6. Enable the remaining ports with initiator manage WOLGA-SLOT3-(0) allow A1
B0 B1 .
Figure 9-144 Enable initiator access to all ports
7. Reboot the server and verify after reboot that you see twenty drives in the
device manager and five multipath device.
IBM FAStT MSJ shows four targets and every target has five LUNs. This is as
expected.
DS400[A]# initiator manage WOLGA-SLOT3-(0) info
----[ Initiators ]---------------------------------------------------------
----[ Initiator 'WOLGA-SLOT3-(0)' ]----------------------------------------
WWN: 210000e08b0ff748
Alias: WOLGA-SLOT3-(0)
ID: 4
Port access:
Port A0 Port A1 Port B0 Port B1
---------------------------------------------------------------------------
YES NO NO NO
LUN Mappings:
LUN logical [Capacity]
----------------------------------------------------------------------------
0 WOLGA-BOOT [ 30.00GB]
1 WOLGA-DB [ 15.00GB]
2 WOLGA-LOG [ 11.01GB]
3 WOLGA-MEDIA [100.00GB]
4 WOLGA-TEMP [900.00MB]
DS400[A]#
DS400[A]# initiator manage WOLGA-SLOT3-(0) allow all
Access allowed to initiator WOLGA-SLOT3-(0) on A1, B0 and B1
DS400[A]#