IBM TotalStorage DS300, Best Practices Manual, Page: 322 / 680

304
IBM TotalStorage DS300 and DS400 Best Practices Guide
Figure 7-123 Test setup
7.3.2 iSCSI SANsurfer management software installation
To install the SANsurfer management software for Linux, follow these steps:
1. Open a shell in your graphical environment. Extract the installation file and
start the installation executable as shown in Figure 7-124 on page 305.
colorado:~/qla4xxx # tar xzf qla4xxx-5.00.03-2.tar.gz
colorado:~/qla4xxx # cd 5.00.03/
colorado:~/qla4xxx/5.00.03 # ./extras/build.sh
qla4xxx -- Building the qla4xxx driver...
make: Entering directory `/usr/src/linux-2.6.5-7.191'
CC [M] /root/qla4xxx/5.00.03/ql4_os.o
CC [M] /root/qla4xxx/5.00.03/ql4_init.o
CC [M] /root/qla4xxx/5.00.03/ql4_mbx.o
CC [M] /root/qla4xxx/5.00.03/ql4_iocb.o
CC [M] /root/qla4xxx/5.00.03/ql4_isr.o
CC [M] /root/qla4xxx/5.00.03/ql4_isns.o
CC [M] /root/qla4xxx/5.00.03/ql4_nvram.o
CC [M] /root/qla4xxx/5.00.03/ql4_dbg.o
CC [M] /root/qla4xxx/5.00.03/ql4_cfg.o
CC [M] /root/qla4xxx/5.00.03/ql4_cfgln.o
CC [M] /root/qla4xxx/5.00.03/ql4_fo.o
CC [M] /root/qla4xxx/5.00.03/ql4_foio.o
CC [M] /root/qla4xxx/5.00.03/ql4_foioctl.o
CC [M] /root/qla4xxx/5.00.03/ql4_foln.o
CC [M] /root/qla4xxx/5.00.03/ql4_xioct.o
CC [M] /root/qla4xxx/5.00.03/ql4_inioct.o
CC [M] /root/qla4xxx/5.00.03/ql4_32ioctl.o
LD [M] /root/qla4xxx/5.00.03/qla4xxx.o
Building modules, stage 2.
MODPOST
CC /root/qla4xxx/5.00.03/qla4xxx.mod.o
LD [M] /root/qla4xxx/5.00.03/qla4xxx.ko
make: Leaving directory `/usr/src/linux-2.6.5-7.191'
colorado:~/qla4xxx/5.00.03 #