![background image](http://html1.mh-extra.com/html/ibm/totalstorage-ds300/totalstorage-ds300_best-practices-manual_3462750605.webp)
Appendix A. Command line interface reference
587
Use the
continual
option to have the test performed continuously.
The
stop
option will cause the test to be halted immediately an error is detected.
Press
Esc
to abort the test. Press
Return
(or
Enter
) while the test is running to
output ongoing results.
dump [1kxmodem] [xmodem]
Send a diagnostics dump. The
diagnostic.bin
file is created and sent to the
host.
This file is the same file that is generated from the ServeRAID manager when
“Save Support Archive” is selected from the controller pop-up menu.
To save the file, do the following from a CLI prompt using the left most Serial Port:
DS300[A] (diagnostics)# dump 1kxmodem
Creating the dump file: 145.10kB
Issue the
1kxmodem
command to start the transfer
→
at this time select “receive”
from the Terminal application menu (Hyperterminal).
Diagnostics dump was successfully sent
From a Telnet session:
DS400 (diag)# dump xmodem
→
press
Enter
Creating the dump file: 0kB
→
at this time select “receive” from the Telnet File menu
Creating the dump file: 0 B Diagnostics dump was successfully sent
ping [timeout time] [count number] host [interface]
Check the connectivity from a port to the specified network node. Each ping
attempt result is reported immediately. A line is output for each ping attempt.
The optional
timeout
option defines the number of seconds to try each ping
attempt (default 1 second). The
time
parameter is the number of seconds.
The optional
count
parameter defines the number of times to attempt the ping if
an attempt fails (default 1)
The command returns immediately if a ping attempt succeeds; otherwise, the
delay is approximately the product of
time
and
number
.
Summary of Contents for TotalStorage DS300
