IBM TotalStorage DS300, Best Practices Manual, Page: 611 / 680

Appendix A. Command line interface reference
593
upload url
Upload a new image to be used the next time the unit is rebooted. If the upload is
successful the new image will be used the next time the unit is booted and the
current image is set as the alternative.
The
url
option gives the URL which the unit will access to download the new
image. The url can take any of the common formats:
򐂰 http:// host:port/pathname
򐂰
http:// host/pathname
򐂰 ftp:// host/pathname
A.16 Initiator commands (iSCSI)
These commands are used to manage remote iSCSI initiators. They are
available after the
initiator global command, or as global commands by
preceding them by initiator.
create name iqn [align boolean] [piggyback boolean] [ping
boolean]
Create a new remote iscsi initiator with the local name where
iqn
is the IQN of
that initiator.
Note: For information about initiator commands for FC, see Initiator
Commands (FC).
Note: Remote iSCSI initiators are also implicitly created by other commands
Command Parameters Levels
create Name iqn [ options ] administrator
destroy initiator_list administrator
info [ initiator_list ] all
list all
local all
manage initiator (See initiator manage initiator commands)