IBM TotalStorage DS300, Best Practices Manual, Page: 318 / 680

300
IBM TotalStorage DS300 and DS400 Best Practices Guide
Figure 7-116 Updated iSCSI target list
7. The last step is the authentication configuration. See 7.2.4, “Configure
authentication” on page 300 for further actions.
7.2.4 Configure authentication
1. From the Target Settings register card look for those iSCSI targets which will
be attached to the host. Check the Bind check box for each target. Click the
Config Authentication button.
Figure 7-117 Bind
2. Enter the administration password. The default password is config.
3. Click Yes .