IBM System Storage DS3000, Programming Manual

Page: 636 / 652

must make sure that these volumes are correct . If the volumes are not correct, the utility will run, but the
volumes will not be consistent. For each mirror, the secondary volume and the copy volume must reside
on the same storage subsystem.
This example shows a configuration file for the Enhanced Remote Mirroring utility
Log{ file="d:\rvm-consistency.log" }
VolumeSet "set1" {
optimalWaitTimeLimit = 15
Mirror {
Primary = LosAngelesArray.PayrollVolume
Secondary = NewYorkArray.PayrollVolume
Copy = NewYorkArray.PayrollVolumeImage
}
Mirror {
Primary = LosAngelesArray.PayrollVolume
Secondary = BostonArray.PayrollVolume
Copy = BostonArray.PayrollVolumeImage
}
}
VolumeSet "set2" {
Mirror {
Primary = BostonArray.HRVolume
Secondary = LosAngelesArray.HRVolume
Copy = LosAngelesArray.HRVolumeImage
}
}
C-4
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide